Skip to main content

How to Attach Euro Plates


  1. Video description

    JUSTIN smiles and introduces himself. He’s in front of a black Audi. The PPQ logo, phone number 135 356 and appear in the top left corner. The video title appears in large white text. The title reads: Attaching Euro Plates.


    Bonjour, JUSTIN here from Personalised Plates Queensland, showing you the easiest way to attach your new Euro Plates.

  3. Video description

    JUSTIN is kneeling front of the grille of the black Audi, talking directly to camera and holding up a form. The black Audi still has its standard issue plates attached.


    So after you've handed in this Remove and Attach form to your nearest Department of Transport and Main Roads...

  5. Video description

    JUSTIN puts down the form and playfully throws a screwdriver in the air and catches it with his hand.


    Simply remove your old plates with one of these.

  7. Video description

    JUSTIN then turns to the car, unscrews the number plate and takes it off the car. JUSTIN puts the screwdriver on the ground. JUSTIN holds the new Euro Plate up to the car grille and uses a black marker to mark the positions where screws holes will be drilled in the number plate.


    Then, just hold your Euro Plate up against your plate recess and mark the vertical position and spacing of the existing holes on your bumper.

  9. Video description

    Close-up of a Euro Plate on a wooden board. JUSTIN’s hand is holding a ruler against the Euro Plate.

  10. JUSTIN

    Once you've done that, take your plate and place it on a workbench.

  11. Video description

    Using a ruler, JUSTIN measures the distance from the top and side of the Euro Plate to the black marks made, on both the left- and right-hand sides of the plate.

  12. JUSTIN

    Measure the horizontal and vertical distance of your front markers and transpose them onto the back of your plate.

  13. Video description

    The plate is lying face down on a wooden board. A drill is used to drill holes into the back of the plate.

  14. JUSTIN

    Now grab a drill and drill your holes. Make sure you don't apply excessive pressure and only use a sharp drill bit.

  15. Video description

    Wider shot of JUSTIN kneeling down in front of the grille of the black Audi. He talks to camera as he holds the Euro Plate up against the car’s bumper and uses a screwdriver to screw the plate into position.

  16. JUSTIN

    Now that we've got our holes drilled simply hold your plate up against your bumper and screw it on.

  17. Video description

    Close-up of screwdriver and tightening screws.

  18. Audio description

    Low sound of screwdriver tightening the screws in the plate

  19. Video description

    JUSTIN pulls on the Euro Plate. The plate flexes slightly but stays on the car.

  20. JUSTIN

    Give it a shake, make sure it's nice and tight and then do the same

    with your rear plates.

  21. Video description

    As in the opening scene, JUSTIN stands in front of the black Audi with its new Euro Plates attached.

  22. JUSTIN

    And remember if you're replacing your old plates, be sure to surrender them to your nearest Department of Transport and Main Roads within 14 days.

  23. Video description

    Superimposed on screen is the text: PPQ, 136 356,, and the text: For more information visit JUSTIN smiles and waves at the camera with his right arm.

  24. JUSTIN

    And after that you're set to go! Au Revoir.